SEM 816D
Main Specification
Operating Weight | 16 900 kg |
Ground Pressure | 66.8kPa |
Ground Clearance | 410mm |
Max.Slope | 30° |
Engine
Model | WD10G178E25 |
Rated Power | 131kW |
Working Tool
Blade Type | SU, S |
Blade Capacity | 4.3m3, 3.5m3 |
Blade Width | 3,180mm, 3,590mm |
Blade height | 1,240mm, 1,165mm |
Max. Blade Digging Depth | 430mm, 430mm |
Max.Blade Lift Ground Clearance
| 1,041mm, 1,041mm |
Max.Output Rimpull | 280kN |
Maximum Digging Depth Of Ripper | 584mm |
Maximum Clearance Under Tip | 615mm |
Powertrain
Type | dual-path, closed loop electronically controlled hydrostatic drive system |
Travel Speed-F/R | infinitely variable speeds 0-10 km/h |
Steering & Brake | hydrostatic steering; wet,multi-disc brake |
Minimum Streeing Radius | |
Undercarriage
Track Shoe Width-Single | 510mm |
Track Shoe Width-APEX | / |
Track Shoe Quantity | 37 |
Length Of Track On Ground | 2,430mm |
Track Gauge | 1,880mm |
Track Roller Quantity | 6 |
Carrier Roller Quantity | 2 |
Hydraulic System
Type | center close, pilot control |
Implement Hydraulic System Pressure | 19 MPa |
Service Refill Capacities
Fuel Tank | 320L |
Cooling System | 45L |
Engine Crankcase | 24L |
Final Drive (each side) | 30L |
Hydraulic Tank | 140L |